The cisco router login is accessed through the Cisco IP address, so try out this and read more about it. For those who are just starting out with their Cisco IP phone connections, there are some steps that you must follow, in order to log into your Cisco IP phone and make calls. Once you get to the Cisco IP phone login page, first you have to get the standard default username and password to access the portal. However, before that, you should access the main Cisco website, and for that, first you have to get a Cisco IP phone.

 

After that, go to the router setup page, then click on the section marked 'ISPs and Modem Access.' On the new page that appears, fill in all the required information, and save it. Now you have to enter the IP addresses of the internal modems as well as of the external routers. These steps ensure that when you login to the portal, they do not return default log-in credentials.

 

You have to enter the details such as your name, company name, department, and email address etc. in the appropriate fields and hit the Enter key. Then you have to click on the 'Submit' button, so that the details of your router IP address login page are entered into the system. The above steps ensure that you get back your ISP and modem details from the router reset, after you have changed the settings for the reset procedure.

Change Cisco Router Login

 

The above mentioned process helps you in getting back your ISP and modem as well as external router IP address admin password. Before proceeding further, the software boots up and prompts you to type in the login details. Click on the 'OK' button and a window will appear, where you have to enter in the username and password. Type the correct information and click on the 'Submit' button. You will receive a success message, as well as the message 'You have successfully logged in to the Cisco modem.'

Note - How To Login On 192.168.178.1

 

It is important that you change the password at least once in a year, else there is a chance of anybody else accessing your routers. You can create different user groups and assign different passwords. For instance, all the employees of the same department can have a different username and password. You can create a group for the internal staff and assign them different username and passwords. Similarly, if you have more than one user in the department, then you can assign different usernames and passwords to each of them.

Note - What Is A Cascaded Router

 

The reset procedure helps in changing the login details of your system so that they don't automatically log in to the Ethernet interface with the old configuration. The CSID of the Ethernet interface will be reset to its current value. You also have to remove the reset tab of the Ethernet cable so that the new settings take place.

 

Another option to change the default credentials is to use the command line interface. The command-line interface has the capability to change the configuration settings directly. To do this, first you have to enable the port forwarding for the interface and then open a new command-line session with the affected device. Enter the following command: telnetdiscovery

 

This command will configure the interface to use a random network name. It will also set the Preferred Name server (PNSD) and the DNS server. It will setup the preferred username and the new password for the NetBackup server. After the setup is complete, the NetBackup will forward the selected traffic to the chosen destination. To finish off, open the NetBackup console to view the details of the backup job and verify that the backup job is successfully setup.

Thank you for reading, for more updates and blog posts about cisco router login don't miss our homepage - In Location Alliance We try to write the blog bi-weekly